MYTEK PROS / CONNECTED OPERATIONS
Tank and Reservoir Level Monitoring
See what is happening in remote tanks and reservoirs.
Plan your project
01 / THE OPPORTUNITY
Bring remote levels into daily planning.
Facilities, industrial operations, agriculture and water operators
Manual level checks make replenishment and high-level response reactive.
Select radar, ultrasonic, or submersible sensing for the vessel and material, then build practical low/high-level and trend reporting.
- Plan replenishment with better information
- Identify unusual level changes
- Reduce routine manual checks
APPLICATIONS IN PRACTICE
Different tanks. Defined responses.
Illustrative scenarios for facilities teams and operators.
A farm wants visibility into an irrigation reservoir.
ObserveMeasure level at a validated reference point.
ActSchedule replenishment or investigate a low-level alert.
ReviewDaily level, low-level duration and refill history.
Level trends do not reveal water quality.
A factory tracks a process-liquid tank.
ObserveChoose chemically compatible radar or another approved sensor.
ActNotify operations at agreed operating thresholds.
ReviewLevel and fill-cycle report with measurement-quality flags.
Do not assume every model is approved for explosive atmospheres.
A building monitors a rainwater storage tank.
ObserveConvert measured level using a verified tank shape.
ActPlan maintenance and water-use adjustments.
ReviewEstimated storage volume and observed replenishment patterns.
Derived volume accuracy depends on geometry and installation.
03 / FROM SIGNAL TO RESPONSE
From observation to action.
Define the signal, the connection and the person responsible for the next step.
View measurements & event details
- Distance to a target surface or hydrostatic water level
- Supported tilt or device-position events
- Estimated volume only after geometry calibration
A DEFINED SERVICE SCOPE
What Mytek Pros can help deliver.
Mytek Pros helps California operators select tank or reservoir level sensing around the material, vessel shape, mounting position and surface conditions. The scope validates a reference point, operating thresholds and replenishment workflow; volume estimates are added only with a verified tank profile. Discovery confirms the site, delivery area and qualified installation needs. Level monitoring does not measure water quality or replace independent overfill protection.
Explore service planning for San Diego and California projects. Installation, handover and ongoing support are agreed during discovery for the selected equipment and site.
View planned service deliverables
- Material and vessel compatibility assessment
- Mounting, blind-zone and datum calibration
- Threshold and replenishment workflow
- Optional volume conversion from a verified tank profile
THE RECORD YOU KEEP
Your reporting scope.
A configured Mytek Pros service can turn the selected measurements into:
- Level trend and threshold duration
- Approximate fill volume using the agreed tank model
- Refill events and rate-of-change exceptions
Configurable project options; confirm scope during discovery.
04 / DISCOVERY & DESIGN
Before installation.
Confirm compatibility, placement and operating responsibilities for your site.
What we’ll work through
- Level is not water quality, composition or custody-transfer quantity
- Foam, obstructions, turbulence and chemical compatibility affect sensor selection
- Hazardous locations require the exact certified variant and qualified design
- Overfill safety needs an independent engineered safeguard
Tell Mytek Pros about your site, existing systems, and the decisions you want the data to support.
Plan tank level monitoring with Mytek Pros ↗EXPLORE CONNECTED APPLICATIONS