MYTEK PROS / CONNECTED OPERATIONS
Equipment Tilt and Position Monitoring
Watch selected assets for a change in angle or position.
Plan your project
01 / THE OPPORTUNITY
Choose sensing for the movement that matters.
Facilities, estates, construction and asset-management teams
A moved panel, tipped container, or changed equipment position may go unnoticed between rounds.
Establish a valid reference, set practical thresholds, and use event history to help staff decide when inspection is needed.
- Identify position changes
- Prioritize site checks
- Keep a record of recurring movement
APPLICATIONS IN PRACTICE
Inclination and position in context.
Illustrative scenarios for facilities teams and operators.
A facility wants to know when a service panel is moved.
ObserveConfirm that panel movement changes measurable inclination relative to the commissioned reference; otherwise use an appropriate contact or position sensor.
ActAsk maintenance to inspect an unexpected threshold event.
ReviewPanel movement and inspection chronology.
A tilt event does not prove unauthorized access.
An estate monitors a tipping waste container.
ObserveUse suitable tilt sensing on the bin.
ActSend a review task after a meaningful angle change.
ReviewTilt-event frequency and recorded condition.
Normal collection movement must be accounted for.
A site checks whether portable equipment remains upright.
ObserveTrack angle with a suitable mount.
ActNotify the site contact to verify an exception.
ReviewPosition-change and reset log.
This is not a substitute for equipment safety controls.
03 / FROM SIGNAL TO RESPONSE
From observation to action.
Define the signal, the connection and the person responsible for the next step.
View measurements & event details
- Supported inclination or tilt axes from a suitable, correctly mounted sensor
- Relative tilt or motion events on supported trackers
- Optional position from a separate supported source
A DEFINED SERVICE SCOPE
What Mytek Pros can help deliver.
Mytek Pros helps San Diego facilities monitor selected equipment for changes from a commissioned angle reference. Planning checks the mounting, movement type, communication conditions and reset rules, then routes meaningful exceptions to staff for inspection. Discovery confirms the assets and regional delivery scope. If a panel rotates without changing gravity-relative tilt, the design needs suitable contact or position sensing instead.
Explore service planning for San Diego and California projects. Installation, handover and ongoing support are agreed during discovery for the selected equipment and site.
View planned service deliverables
- Mounting and reference-angle setup
- Threshold and reset rules
- Environmental and communications assessment
- Inspection workflow and reporting
THE RECORD YOU KEEP
Your reporting scope.
A configured Mytek Pros service can turn the selected measurements into:
- Angle trend and threshold events
- Repeated movement by asset
- Staff-recorded inspection and reset history
Configurable project options; confirm scope during discovery.
04 / DISCOVERY & DESIGN
Before installation.
Confirm compatibility, placement and operating responsibilities for your site.
What we’ll work through
- Tilt is not vibration analysis or structural-health certification
- A moved sensor and a moved asset may look similar
- Do not use this as a safety-rated machine or slope-monitoring system
- Recalibration may be needed after authorized movement
- Rotation about a vertical hinge may not change gravity-relative tilt; validate the movement and choose suitable contact or position sensing when needed
Tell Mytek Pros about your site, existing systems, and the decisions you want the data to support.
Assess equipment tilt monitoring with Mytek Pros ↗EXPLORE CONNECTED APPLICATIONS