MYTEK PROS / CONNECTED OPERATIONS
Equipment Current and Load Monitoring
See how selected electrical equipment is being used.
Plan your project
01 / THE OPPORTUNITY
See the load patterns between checks.
Maintenance, facilities and industrial operations teams
Equipment can run unexpectedly or change behavior without showing up clearly on a utility bill.
Current sensors can reveal operating patterns and abnormal loading that help your maintenance team decide what to inspect.
- Identify unplanned run periods
- Spot changing load patterns
- Prioritize maintenance investigation
APPLICATIONS IN PRACTICE
Current trends for equipment review.
Illustrative scenarios for facilities teams and operators.
A facility suspects a fan runs overnight.
ObserveTrend current on the fan’s conductor.
ActCompare inferred run state with the operating schedule.
ReviewEstimated run hours and out-of-hours operation.
A current threshold must be validated against actual equipment state.
A workshop wants visibility into a three-phase load.
ObserveMonitor each supported phase or independent circuit.
ActAsk maintenance to investigate persistent deviations.
ReviewPhase-current trend and abnormal-load periods.
Current imbalance does not by itself identify the underlying fault.
A site checks a cable-temperature concern.
ObserveUse the supported external temperature probe alongside current.
ActEscalate exceptions to a qualified electrical team.
ReviewTemperature-current correlation and inspection notes.
The sensor does not replace protective breakers or thermal safety systems.
03 / FROM SIGNAL TO RESPONSE
From observation to action.
Define the signal, the connection and the person responsible for the next step.
View measurements & event details
- RMS current and accumulated ampere-hours
- Optional external wire temperature
- Device power-storage or communication state where available
A DEFINED SERVICE SCOPE
What Mytek Pros can help deliver.
Mytek Pros can scope current-sensor placement and qualified installation for selected equipment at a San Diego facility. Validated thresholds and operating baselines support run-pattern and abnormal-load reviews; current alone is not a direct kWh measurement or a diagnosis of equipment failure.
Explore service planning for San Diego and California projects. Installation, handover and ongoing support are agreed during discovery for the selected equipment and site.
View planned service deliverables
- Conductor and range survey
- Qualified clamp-sensor installation
- Operating-baseline and threshold setup
- Optional cable-temperature sensing
THE RECORD YOU KEEP
Your reporting scope.
A configured Mytek Pros service can turn the selected measurements into:
- Equipment run-state estimates from validated current thresholds
- Load profiles and unusual-current events
- Estimated energy only where voltage and power-factor assumptions are documented
Configurable project options; confirm scope during discovery.
04 / DISCOVERY & DESIGN
Before installation.
Confirm compatibility, placement and operating responsibilities for your site.
What we’ll work through
- Current alone does not directly measure true kWh
- Device-calculated kWh using configured voltage/power factor is an estimate
- Current patterns cannot reliably diagnose bearings or prove an imminent failure
- Self-powered devices have minimum load and finite outage operation
Tell Mytek Pros about your site, existing systems, and the decisions you want the data to support.
Review your equipment load-monitoring plan ↗EXPLORE CONNECTED APPLICATIONS