2-Door Access Starter System
2-Door Access Starter System
Model: Mytek Door-2
A ready-to-install UniFi Access system for a small office or suite with 2 non-fire-rated doors: card/fob + mobile-unlock readers, one door hub per door, fail-safe strike locks (correct for non-fire-rated doors -- they unlock on power loss), and a starter pack of 10 access cards. Reader, hub, and lock selection uses the same logic as our Door Access System Builder tool. As with any electrified door lock, wiring it to the fire alarm system's releasing circuit (where applicable) must be verified by your installing electrician/AHJ.
$894.61 (estimated; tax and availability confirmed with your quote)
Commercial and multi-unit projects typically qualify for volume pricing -- confirmed with your quote.
Related Products
A compact, weatherproof NFC reader that mounts beside a door to authenticate cards, fobs, phone wallets, or app-based mobile unlock before triggering the connected access hub. It's the standard single-door reader in the UniFi Access lineup for both indoor and outdoor mounting.
A step up from the standard reader, this unit adds a 4.7-inch touchscreen and a 12MP camera for facial recognition, effectively combining a card/fob reader with a mini intercom at one entry point. Good fit for lobby or amenity-space entries where an extra layer of visual verification is wanted.
The largest UniFi Access controller, built to manage up to eight doors from one wall-mounted enclosure with onboard battery-backup power. This is the hub Mytek would spec for a multifamily building's main entries, amenity spaces, and back-of-house doors on a single controller instead of stacking several single-door hubs.
A DIN-rail-mounted single-door controller that sits between the readers and the electrified lock hardware, handling entry/exit logic, relay outputs, and door-position sensing for one opening. This is the typical hub for a standard single-door install (office suite, unit entry, mechanical room).