Mytek Pros delivers end-to-end IT services, managed security, and low-voltage design/build for businesses across San Diego County and California.
Loading
Mytek Pros delivers end-to-end IT services, managed security, and low-voltage design/build for businesses across San Diego County and California.
Model: Mytek Door-4
A ready-to-install UniFi Access system for a small commercial building with 4 doors, including 1 fire-rated egress door: card/fob + mobile-unlock readers, one door hub per door, a mix of fail-safe (non-fire-rated) and fail-secure (fire-rated, per NFPA 80) strike locks, and 20 access cards. Any electrified lock on a fire-rated or means-of-egress door must still be wired to the fire alarm panel's releasing circuit so it unlocks automatically on alarm -- that wiring has to be verified by your installing electrician/AHJ, not something a parts list alone can satisfy.
$1,789.22 (estimated, plus tax at checkout)
Commercial and multi-unit projects typically qualify for volume pricing -- confirmed with your quote.
A compact, weatherproof NFC reader that mounts beside a door to authenticate cards, fobs, phone wallets, or app-based mobile unlock before triggering the connected access hub. It's the standard single-door reader in the UniFi Access lineup for both indoor and outdoor mounting.
A step up from the standard reader, this unit adds a 4.7-inch touchscreen and a 12MP camera for facial recognition, effectively combining a card/fob reader with a mini intercom at one entry point. Good fit for lobby or amenity-space entries where an extra layer of visual verification is wanted.
The largest UniFi Access controller, built to manage up to eight doors from one wall-mounted enclosure with onboard battery-backup power. This is the hub Mytek would spec for a multifamily building's main entries, amenity spaces, and back-of-house doors on a single controller instead of stacking several single-door hubs.
A DIN-rail-mounted single-door controller that sits between the readers and the electrified lock hardware, handling entry/exit logic, relay outputs, and door-position sensing for one opening. This is the typical hub for a standard single-door install (office suite, unit entry, mechanical room).